I wrote this article in English because these settings are quite important after and it will be read by many people.
Under ABOUT tab -
---------------------------------------------------------
:Backup/Restore:Remember this feature is available and based on user preference. When you see a noticeable difference in battery life. Save your settings!
:Screen: (Enable) Enable after unlock is one of the most crucial settings on this app. What this does is reconnects your phone with a network after waking up. Also this is a default setting.
:Use APN method: (Skip, recommended) this setting is determined by your phones ability to establish a connection under mobile data control. I would suggest skipping this until you see what effects your phone goes through by default.
Under STATUS tab -
---------------------------------------------------------
{Controls} Data, Wifi (Preferred, Auto disable), Autosync (Ping)
{Schedules} Schedule 30 min. Night (time frame based on user)
{Triggers} Battery 5%, Screen, Traffic 10kb/15s, 15s min
{Location} WiFi (your wifi and all other wifi locations your phone trains to remember) * Will explain later.
:Profile: Each preset could result differences in overall performance. For this setup we want to use ADVANCED. Note that even the CUSTOM preset does not give you as much tweak possibilities as ADVANCED.
:Notifications: (User preference) Not much battery consumption other more memory usage if set to Graphical, overall no difference. The notifications appear under your phones status bar.
:Activity Log: based on user preference, overall no difference. Its a good tool for viewing all phones battery activity in detail.
Under CONTROLS tab -
---------------------------------------------------------
:Mobile Data: (Enable) This setting is pretty obvious. Note this setting will be affecting most importantly with the DATA Toggle widget which comes with Juice Defender * Will explain later.
:Tablet Mode: (Skip, recommended) (1)(2)
:WiFi: (Enable) This setting is pretty obvious, but also based on (User preference). Like the Mobile Data setting above this also is connected to your phones setting. Note this setting is most important and effective with your stock Power Control widget.
ptions: (WiFi preferred) Both sub-options work alike but for most effectiveness with Juice Defender choose WiFi pref. because this setting works together with your Location presets. * Will explain later:AutoSync: (Ping) This setting is a bit confusing. If "ENABLED" it will allow all apps to sync in the background over any data source that is connected. Which will use more power overall. You have the option to disable. But with Ping this will allow only your google account to synced, which is most important. Ping reduces overall data and power usage. * Will explain later.
:Keep Enabled: (Skip, recommended) This quite possibly one of the most important settings. What this does is keep either the option of data or wifi to always be enabled even when the phone is idle. This setting is crucial. For the ideal settings make sure that neither options are selected, (not highlighted) If either is selected, that option will always be active in result drain your power even when phone is idle and not in use. Its best to skip. * Will explain later. (2)
:Bluetooth: (Skip, recommended) (1)(2)(3)
;Disable Timeout to Force Reconnect: (Skipped if Bluetooth is disabled) (2)
:Timeout: (Skip, recommended) (1)(2)(3)
:Keyguard and Home WiFi network: (Skipped if Timeout is disabled) (2)
:Brightness: (Skip, recommended) (1)(2)(3)
:Levels to Night tint: (Skipped if Brightness is disabled) (2)
Under SCHEDULES tab -
---------------------------------------------------------
[Important] - These SCHEDULES settings are partly connected to Keep Enabled settings under the CONTROLS tab.
:Schedule: (Enabled) This will allow you system to conduct periodic data syncs. Depending on the sub-options below. Wether WiFi or Data is active. This applies to that preset.
:Frequency: (User preference) This has 5 options. The longer the interval the less battery consumption overall. In short, this setting is only effective if either (Keep Enabled) options are active. (2)
;Duration: (User preference) This has 5 options. The longer the interval the less battery consumption overall. In short, this setting is only effective if either (Keep Enabled) options are active. (2).
[Please Note] - By default the frequencies are matched ideally to a specific duration. In theory the longer your system waits to update/sync the more data will be needed to be downloaded. So it might take longer.
:Controls: (Default) also a (User preference) option. Selecting custom allows you to either choose Data or WiFi to be used for scheduled triggers. Default = autosync = autoconnect. Which toggles each interface depending on which is being used the time if not disabled.
:Night: (Enabled) This is one of the most important settings in all of Juice Defender. This allows you set a specific time based on User preference to automatically disable both Data and WiFi during Night set times. This is where your battery will save the most power. You do not need incoming Data from either source when your sleeping.
:Start/End: (User preference) You should you set it to the times you usually sleep. Mine is set from 2:30am to 10:30am.
:Adaptive Start/End: (Skip, recommended) (1)(2)(3)
ptions: (User preference) Here you can choose what your phone does when in night mode. Pretty straight forward. (2)(3):Peak: (Skip, recommended) (User preference) (2)(3) This feature allows you set a specific time in which your phone will not disconnect from either source. Example if your a business type who needs to receive emails constantly. This setting will affect your battery greatly. Suggest skipping.
:Start/End to Controls: (Skipped if Peak is disabled)(2)
To keep it short;
:Weekend: (and all sub-options) (Skip, recommended) (User preference) (2)(3) This works like Peak but is used for specific days and times. To much micro-management. Very unnecessary.
Under TRIGGERS tab -
---------------------------------------------------------
[Important] - These TRIGGERS settings are connected to SCHEDULES settings under the SCHEDULES tab.
:Battery: (Enabled) This option is basically a lifeline. It will allow the following sub-options to be active. This will help your battery save its last bit of energy by disabling all incoming data and sources when triggered by the threshold below.
:Battery Threshold: (User preference) 5 options. The first 2 are most important. My setting is at 5%.
:Charger: (Skip, recommended) (User preference) This setting will allows connections to be made when connected to either USB or AC. Note, is disabled your battery will charge faster. (2)(3)
:Screen: (Enabled) This option will automatically connect to any Data source when your screen is on. When your actually using your phone. This setting is crucial to Keep Enabled. * Will explain later.
ption: (Skip, recommended) (User preference) Self explanatory (ignore on low battery) this option is pointless. It contradicts the entire battery threshold preset.:Controls: (Default) Also a pointless option. This settings works exactly the same as the Autosync setting under the CONTROLS tab. It actually contradicts the Autosync. What it does is determines which data source will be connected based on preference. But with Ping selected. That alone takes care of that. (2)
:Traffic: (Enabled) Allows connections to remain connected when data is being transferred especially if phone is idle or enters Night mode. Then disables after.
:Traffic Threshold: (Skip, recommended) By default Enabling Traffic will automatically select a preset. This is also based on phones performance when it comes to receiving Data. This is also pretty confusing. (2)
:Apps: (Disabled) (Skip, recommended) (User preference) For best results its best to leaves Disabled. To much micro-management. Very unnecessary. (2)(3)
:Configure and Controls: (Skipped if Apps is Disabled) (2)
:Location: (Enabled) One of the best features on Juice Defender. After connecting to a preferred WiFi location. Juice Defender will train the system to remember the location allowing it to automatically connect when within range of the radius. This feature is connected to the majority of presets. Its the best feature hands down in Juice Defender (2)(3)
(1) This is also a beta feature which isn't fully tested. Could cause problems.
(2) Read the setting description for more info.
(3) Disabled by default.
As i said I would explain.
Juice Defender isn't complicated. For best results its best to use the widgets which come with the app, and place them on your home screen. Also use your Power Control widget to work hand in hand with Juice Defender.
The Run Down. Your phone is constantly connected to a data connection of some sort, whether its wifi or data over 3g or 4g depending on your phone. The reality is. This isn't always needed. And is the main cause of your phone to be dead by the end of the day. So I'm going to tell you how to manage your phone to get the best results.
The Process. Assuming you took into consideration my settings. Its best to make sure your Juice Defender is restarted. Simply click the back button on the app, then swipe down the status bar and watch it restart. After charge your phone. Give it a few hours even after it says 100% what this does is gives Juice Defender to get your battery calibrated and under control. Now. Your widgets. The key widget is your data toggle on/off. Simply turn it off. You don't need data 24/7. This alone will boost the life of your battery. Whenever you need to use the internet, send an email or stream music... Simply turn it on. Its that simple. Whenever your done turn it off. As i mentioned. Ping and Location are the very important. With Ping and Location enabled your phone will simply connect to your WiFi within range. Along with the screen setting. All connections are disabled when phone is idle. Once unlocked thanks to Ping it simply reconnects. Which why i explained that most settings are mangled together. Pretty straightforward. With the settings i provided and the simple instructions as to how to use it. Your phone with easily make its way up the x2.0 and up multiplier. Remember your Juice Defender needs time to get to know your battery. So don't expect it to reach the x2.0 multiplier over night
Niciun comentariu:
Trimiteți un comentariu